Steel Bar Rib Peeling and threading machine
This system contains one set of ZL-40B2 rebar thread rolling
machine and couplers. The machine can be applied to process thread
on rebar end in construction. It can process HRB335、HRB400、HRB500
hot rolled ribbed bar with diameter 16—40mm.
the capacity and usage
the steel bar rib peeling and threading machine is the exclusive
use rib peeling knurling machine for the straight screw thread
connecting .it is mainly used in the processing of the top of the
structural steel bar.
Feature and advantage
1).It can complete the rib peeling ,and then roll and press the
thread processing in one loading and the speeding of the processing
was very quickly.
2). High automation with easy operation.
3).The steel bar was rolled and pressed after the rib peeling and
it makes the screw thread with better decorative design, high
precision and good diameter consistency.
4).The range of the steel bar processing is very large; this
machine can complete the processing of the screw thread for the
steel bar in the diameter range of 16---40mm.
5). The rolling head structure was scientific , one machine only
equipped with one rolling head. It can complete the positive and
negative roll extrusion together when changing the position of the
6).It is very easy to roll and press the different standard steel
bar with the same thread pitch ,it can be adjusted without
disconnect the rolling head
7).The pressure dimension was stable and the rolling head can be
adjusted and it also has the orientation system.
First, It can peel the across and vertical rib by the rib peeling
mechanism and then use the roll extrusion part to roll and press
the screw thread. This machine combines the rib peeling, rolling
and pressing together. It can complete the screw thread processing
with only once of the loading.
Steel bar rib peeling roll stamping connection process:
(1) Strip rebar rib first.
(2) Roll parallel thread on rebar end.
(3) Splice two pieces of threaded rebar with coupler.