The splicing coupler model is divided into 9 categories according
to the rebar coupler.
.The material of the splicing coupler is carbon constructional
.The coupler can link the rebar which diameter from 16mm to 40mm
.The tensile strength of the coupler can be more than 570 mpa
.This kind of connection is more rapid and simple convenient
-new way to splice rebar diameter 16mm-40mm.
-material: 45# constructional carbon steel
-package: carton and wooden pallet
-with high tensile strength and good quality.
1. No torque wrench required.
2. Assembly validated by visual inspection.
3. Manufacturing of couplers under strict quality plans.
4. Standard ISO Parallel Metric Thread design.
5.Install quickly，conveniently，shorten construction period，cost
The Characteristics of the Usage
Used in the occasion for connecting the steel bar in normal
2.Different Diameter Model：
Used for connecting the steel bar in different diameter
sed for the steel bar which was hard to match
4.Positive And Negative Screw Thread Model：
Used in the occasion when the steel bar in the two sides both can
not be turned but the lengths can be adjusted.
5.Locking Nut Model：
Used when the steel bar can nut be turned,then it truns the
splicing coupler to join the steel bar and then lock the splicing
coupler with the locking nut.
parameter of coupler: